Projection screen materials

MWE White PVC for Square Low-Voltage Electric Screens

MWE White PVC is one of four current material choices for the Square Low-Voltage Electric Projection Screen. This is the non-tab-tensioned, fixed indoor model. Its published material table identifies MWE and the optical values below; confirm the selected size, surface version and projector conditions together when ordering.

MWE White PVC for Square Low-Voltage Electric Screens projection screen material sample

Material details

MWE White PVC for Square Low-Voltage Electric Screens configuration reference
Material codeMWE
SurfaceWhite PVC fabric
Listed screen modelSquare Low-Voltage Electric Projection Screen
Screen structureNon-tab-tensioned electric screen
Published gain1.05 — Square Low-Voltage Electric listing
Published viewing angle165° — Square Low-Voltage Electric listing
InstallationFixed indoor wall, ceiling or D-ring suspension

These optical values are published for MWE on Square Low-Voltage Electric. Other screens also offer MWE White PVC Fabric; confirm their current specifications separately and do not assume matching replacement fabrication.

Use MWE as a white PVC candidate for the selected Square Low-Voltage Electric installation. Compare it with MWK White Warp-Knitted and MWL White Coated using the intended presentation or film content and actual room lighting. Include image size, projector position and the widest seating positions in the brief. The published viewing-angle figure is not a substitute for checking the room layout. For an existing screen, confirm roller attachment, visible drop and lower-bar construction before requesting a replacement surface, even when the original label also says MWE.

Screen models to review

Use MWE with Square Low-Voltage Electric as the order reference. Other screens also list MWE White PVC Fabric; confirm the target model and material version because shared code letters do not establish replacement compatibility.

Confirm the exact screen structure, size, attachment method and material version before specifying a replacement surface or material supply.

Find a starting point for your project

Explore screen models and project references matched to MWE.

Meeting & education

For MWE, start with Square Low-Voltage Electric and check the image height, room lighting and installation space.

Low-voltage electric

Square Low-Voltage Electric

Material: MWE

Review the specified supply voltage, control interface and installation environment for this exact low-voltage model.

Review screen model

Check small text and charts at the planned image size from rear and side seats. Confirm lighting, projector position and the non-tab-tensioned screen configuration.

Explore meeting-room configurations

Application reference: Robotics training laboratory. Confirm the selected material, projector and room conditions before ordering.

Compare and choose your material

Review the listed configuration, then choose what you want to discuss. Compare up to three.

MWE White PVC for Square Low-Voltage Electric Screens

MWE White PVC for Square Low-Voltage Electric Screens material sampleView material details
Listed surface
White PVC fabric
Optical data
1.05 — Square Low-Voltage Electric listing / 165° — Square Low-Voltage Electric listing
Projector & model fit
Check small text and charts at the planned image size from rear and side seats. Confirm lighting, projector position and the non-tab-tensioned screen configuration.

MWK White Warp-Knitted for Square Low-Voltage Electric Screens

MWK White Warp-Knitted for Square Low-Voltage Electric Screens material sampleView material details
Listed surface
White warp-knitted fabric
Optical data
1 — Square Low-Voltage Electric listing / 155° — Square Low-Voltage Electric listing
Projector & model fit
Compare small text and fine graphics with MWE and MWL at actual viewing distances. Confirm the projector, seating width and room lighting.

Each column describes its own material and screen configuration. Confirm the selected version, optical data, dimensions and attachments before ordering; shared names or codes do not establish interchangeability.

Discuss your material and project

Your selected material and project are included below.

Material: MWE White PVC for Square Low-Voltage Electric Screens / Square Low-Voltage ElectricProject: Meeting & educationEdit selection
What do you need?

Supply format and sample conditions are confirmed for each request. Fields marked * are required.

FAQ

Does MWE White PVC mean the same finished surface on every screen?

Several screen models use the MWE reference. This option is specified for Square Low-Voltage Electric; the shared letters do not establish the same surface attachments, dimensions or replacement fabrication on another screen.

Does the MWE surface make this screen suitable for UST projection?

The current model requires confirmation of the material and throw geometry. Supply the exact UST projector and layout if that is your intended use; the white PVC name and low-voltage operation do not establish compatibility.

What should a replacement enquiry include?

Send the Square screen model, image width and height, required drop, roller connection and lower-bar details, plus photographs of the current surface. MGF can then review the replacement construction and availability.

WhatsApp